singlebuyer
  • Review count
    233
  • Helpfulness votes
    357
  • Average rating
    5.0
    5 out of 5
  • First Review:
    January 14, 2015
  • Last Review:
    September 17, 2019
 
  • Question count
    5
     
    • Answer count
      192
       
       
       
      Activity Summary
       
      • Review count
        233
      • Helpfulness votes
        357
      • Average rating
        5.0
        5 out of 5
      • First Review:
        January 14, 2015
      • Last Review:
        September 17, 2019
       
      • Question count
        5
         
        • Answer count
          192
           
           
           
           
          singlebuyer's Reviews
           
          These turnbuckles are used to create tension in cables, ropes and chains by turning the body of the buckle to take up slack. Used with rope, twine, cables and like items in tensioning systems. Suitable for marine, outdoor or general applications. Comes in eye/eye, hook/eye and jaw/jaw configurations.
           
          from Winston-Salem, NC
          Age Range:55 to 64
          ,
          Gender:Male
          Home Improvement Profile:DIYer
          Received free product:Yes
          This Everbilt 3/8in x 12in turn buckle is 17" when extended using two opposing jaws. Yes my measu...
          PostedAugust 5, 2019
          Overall rating 
          5.0 out of 5
          5.0 out of 5
          Quality 
          5.0 out of 5
          5.0 out of 5
          This Everbilt 3/8in x 12in turn buckle is 17" when extended using two opposing jaws. Yes my measurements are correct. Each end has turning directions cast into the metal to keep you moving in the right direction. The bolts on the end needs a 1/2" wrench to turn them and maybe just a big screw driver to put in the middle to turn it tight. Quality seems very good. Turns easily.
          Pros: Durable, Easy to Move, Good Size & Weight, Nice Design, Sturdy
          Images for this Review
          (click to see full-size image)
          User submitted photo
          This image was submitted as a sweepstakes entry.
          0points
          0out of 0found this review helpful.
           
          Feit Electric 60-Watt Equivalent A19 LED 12-Volt RV/Marine Light Bulb Soft White
          Feit Electric 60-Watt Equivalent A19 LED 12-Volt RV/Marine Light Bulb Soft White
          Enjoy all the benefits of advanced LED energy-saving technology with the Feit Electric 60-Watt Equivalent Warm White A19 LED 12-Volt RV/Marine Light Bulb. This 3000K (bright white) light bulb produces a light output of 800 Lumens, uses only 10.5-Watt of electricity and up to 83% less energy than a standard incandescent light bulb. Choose this light bulb for RV, Marine and 12-Volt uses.
           
          from Winston-Salem, NC
          Age Range:55 to 64
          ,
          Gender:Male
          Home Improvement Profile:DIYer
          Received free product:Yes
          This LED 60 watt bulb is a welcomed change to the delicate incandescent bulbs of the past with th...
          PostedAugust 5, 2019
          Overall rating 
          5.0 out of 5
          5.0 out of 5
          Quality 
          5.0 out of 5
          5.0 out of 5
          This LED 60 watt bulb is a welcomed change to the delicate incandescent bulbs of the past with the fragile filaments which would not last when used in 12 volt applications like in a RV or on a boat. I have a trouble light that I hook to batteries and this is just awesome and way overdue to have and now rely on now. When LEDs came out they were so expensive, but now we know there true worth. This produces a good bright light.
          Pros: Eco-Friendly, Nice Design, Very Bright, lasts a long time
          Images for this Review
          (click to see full-size image)
          User submitted photo
          This image was submitted as a sweepstakes entry.
          0points
          0out of 0found this review helpful.
           
          The Pop-Up Floor Box Receptacle offers a modern, practical way to attractively conceal electrical wiring devices in homes and businesses, while still providing accessibility to power when needed. Featuring a sleek low profile and stylish metal cover that recesses neatly into the floor when not in use, it takes only the press of a button to make the receptacle available. The Pop-Up Floor Box Receptacle may be used to satisfy the appropriate code requirements for residential and commercial applications; it also offers protection from ingress of water spray when closed and meets or exceeds scrub water test for safety.
           
          from Winston-Salem, NC
          Age Range:55 to 64
          ,
          Gender:Male
          Home Improvement Profile:DIYer
          Received free product:Yes
          Leviton 20a Pop-Up Floor Box Self Test GFCI is a very high quality, heavy duty, durable piece of ...
          PostedJuly 30, 2019
          Overall rating 
          5.0 out of 5
          5.0 out of 5
          Quality 
          5.0 out of 5
          5.0 out of 5
          Leviton 20a Pop-Up Floor Box Self Test GFCI is a very high quality, heavy duty, durable piece of equipment. When you press the button the lid slowly opens on it's own and is locked open until you press the button again and push the lid closed. The lid has a rubber seal that runs around it. There is a shield that separates the works from the square metal box it sits in. Brass finish on the lid seems to be capable of giving a beautiful appearance for many years. The documentation provided is extensive and includes templates, plus they include a protection plate for you to protect the lid temporarily. If you are a little bit handy you can handle this installation using the documentation and Read More
          Leviton 20a Pop-Up Floor Box Self Test GFCI is a very high quality, heavy duty, durable piece of equipment. When you press the button the lid slowly opens on it's own and is locked open until you press the button again and push the lid closed. The lid has a rubber seal that runs around it. There is a shield that separates the works from the square metal box it sits in. Brass finish on the lid seems to be capable of giving a beautiful appearance for many years. The documentation provided is extensive and includes templates, plus they include a protection plate for you to protect the lid temporarily. If you are a little bit handy you can handle this installation using the documentation and fasteners provided. The electrical wires are easy to terminate by pushing them into place. What drew me to this was having an outlet for my electric commercial carpet cleaner I use each year and will allow me the rest of the time to have a floor lamp in an area I could not before. You can plug a regular plug in this. These come in different configurations. Read Less
          Pros: Clear Instructions, Compact, Easy Installation, Easy to Use, Lots of Features, Nice Design, Stylish
          Images for this Review
          (click to see full-size image)
          User submitted photo
          User submitted photo
          User submitted photo
          User submitted photo
          User submitted photo
          User submitted photo
          This image was submitted as a sweepstakes entry.
          +1point
          1out of 1found this review helpful.
           
          The Viagrow Diamond film is highly Reflective Mylar Film with a PET coating to prevent corrosion and wear and is dimpled with a diamond pattern for even dispersion of light reflectivity. This Viagrow Diamond film is 100% light tight with a 95% reflective index. The built-in vapor and 6 mil thick film assures durability in humid grow rooms and greenhouse environments. It is easy to adhere to walls using staples tacks or tape.
           
          from Winston-Salem, NC
          Age Range:55 to 64
          ,
          Gender:Male
          Home Improvement Profile:DIYer
          Received free product:Yes
          Viagrow Diamond Coated Mylar 49.5 inches x 32 foot roll. If you have never handled this stuff it'...
          PostedJuly 29, 2019
          Overall rating 
          5.0 out of 5
          5.0 out of 5
          Quality 
          5.0 out of 5
          5.0 out of 5
          Viagrow Diamond Coated Mylar 49.5 inches x 32 foot roll. If you have never handled this stuff it's not fragile and because this is coated it will slow walk any potential corrosion. Another solid feature of this product it is 6mm thick compared to the 2mm stuff that is widely sold. This will be used on the walls of some winter garden boxes I will assembly in the next month or so, to better reflect the light. But it is versatile and useable in more than a few ways. Putting it up is real easy. I like thumb tacks on wood. But tape, staples, wood slats, just lots of ways to get it up. This is a high quality product.
          Pros: Durable, Easy to Clean, Easy to Install, Easy to Use, Good Size & Weight, High Quality, Sturdy
          Images for this Review
          (click to see full-size image)
          User submitted photo
          User submitted photo
          User submitted photo
          This image was submitted as a sweepstakes entry.
          0points
          0out of 0found this review helpful.
           
          The Everbilt dryer vent kit with hood is an accessory used for dryer and exhaust fan venting. The opening and closing damper prevents outside elements from entering the duct. The standard mouth hood design provides maximum airflow, allowing your dyer to run efficiently. The vent is equipped with a removable pest screen that slides out for easy cleaning of lint and debris. This product is built with a UV inhibitor to help prevent fading. The hood and screen materials are paintable to match the accents of the house.
           
          from Winston-Salem, NC
          Age Range:55 to 64
          ,
          Gender:Male
          Home Improvement Profile:DIYer
          Received free product:Yes
          Everbilt Dryer Vent Hood 98253 is dor dryer or exhaust venting. It has an 11 inch tailpiece to re...
          PostedJuly 26, 2019
          Overall rating 
          5.0 out of 5
          5.0 out of 5
          Features 
          5.0 out of 5
          5.0 out of 5
          Energy efficiency 
          5.0 out of 5
          5.0 out of 5
          Quality 
          5.0 out of 5
          5.0 out of 5
          Everbilt Dryer Vent Hood 98253 is dor dryer or exhaust venting. It has an 11 inch tailpiece to reach through the wall. This one has a removable pest screen and has the damper that opens and closes securely and completely behind it. The screen come off easily so you can clean any lint that makes it down that far to make sure the door continues to close completely. Overall size is 4x16 and is made in the USA. You will need 4 fasteners and of course that depends on what you are installing it on. In my case I needed wood screws for the wood siding. Easy to install besides the 4 screws I caulked the base. It will last, my squirrel population has increased, my old one had no screen this provides Read More
          Everbilt Dryer Vent Hood 98253 is dor dryer or exhaust venting. It has an 11 inch tailpiece to reach through the wall. This one has a removable pest screen and has the damper that opens and closes securely and completely behind it. The screen come off easily so you can clean any lint that makes it down that far to make sure the door continues to close completely. Overall size is 4x16 and is made in the USA. You will need 4 fasteners and of course that depends on what you are installing it on. In my case I needed wood screws for the wood siding. Easy to install besides the 4 screws I caulked the base. It will last, my squirrel population has increased, my old one had no screen this provides piece of mind. Read Less
          Pros: Durable, Easy to Clean, Easy to Install, Easy to Use, High Quality, Nice Design
          Images for this Review
          (click to see full-size image)
          User submitted photo
          User submitted photo
          User submitted photo
          This image was submitted as a sweepstakes entry.
          0points
          0out of 0found this review helpful.
           
          << 1 2 3 4 5 6 ... 47 >>
           
          singlebuyer's Questions
           
          Dyna-Glo wall heaters are the ideal choice for safe indoor supplemental heating. This state-of-the-art vent free technology does not require a flue or chimney. These heaters are great for use in your home, cabin or garage. Since these heaters do not require electricity to operate they make an excellent choice for everyday heating and emergency situations when the power goes out. Using blue flame heating technology, heat is distributed similar to your central home heating system. This Blue Flame Wall Heater burns with 99.9% efficiency and operates on Propane only. Not for sale in California or Canada. Check your local regulations on installation restrictions and requirements. Propane use requires 100 lbs. tank or larger with 2-stage adjustable regulator available from local gas company. DEPENDABLE - Ideal for emergency or daily supplemental use ECONOMICAL - Cut heating bills by warming only occupied areas COMFORT Manually adjust the heat setting to your desired temperature SAFE - Built-in oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected CONVENIENT 1 continuous press of the battery assisted igniter makes ignition quick and effortless VERSATILE - Includes all necessary hardware and bracket for wall mounting UPGRADEABLE - Separately sold optional base legs (WBL100) provide the alternative of floor mounting. Separately sold optional Wall Heater Fan (WHF100) distributes heat in a quiet, yet powerful way.
           

          20lb tank revisted.

          Asked by
          singlebuyer
          October 20, 2017
          in your QA on the ice House model you state the 10000 unit can use the smaller tank and here you guys continue to deny it will work. on this small unit the pressure should work....right...with a 20-30 lb tank?
           
          The revolutionary ECHO Speed-Feed 400 takes the hassle out of refilling your trimmer head, and is the easiest tap-to-advance head available on the market today. Reloads in under 30 seconds in just 3 easy steps, all without disassembling the head. The head is designed with a smooth bottom to easily glide across the ground to deliver an even cut. Built for rugged applications where medium to heavy-duty cutting are required. Comes with a 90-day consumer / 30-day commercial warranty.
           

          How do you know when you have 5 inches or less string left on spool?

          Asked by
          singlebuyer
          Winston-Salem, NC
          August 4, 2016
          I read a answer echo left for someone asking about bump and they said don't bump when you have less than 5 inches left or the string would get sucked in.

          So how do you know so you can prevent that?
           
          Eastman water heater stand has a safe loading rate of 650 lbs. Ideally used to meet safety requirements by raising water heater to an acceptable area for code compliance. This reduces the risk of fire and property damage caused by unstable water heaters.
           

          Height from floor?

          Asked by
          singlebuyer
          Winston-Salem, NC
          July 18, 2016
           
          The 1/2 in. x 18 in. SharkBite Water Heater Connector with Integrated Ball Valve allows you to easily connect your Hot and Cold-Water Supply lines to your Water Heater. After applying pipe thread tape to the MIP nipples on your water heater, thread the FIP end of the Water Heater connector onto the tank and tighten with channel locks. Then simply push the SharkBite Push-Fit end onto Copper, PEX, or CPVC pipes and your Water Heater is connected. The Integrated Ball Valve on the SharkBite Water Heater Connector provides a quarter-turn, single handle shut-off to the water supply. The braided stainless-steel lines are available in different lengths from 12 in. - 24 in. (without Ball Valve) and are also available in Corrugated Stainless Steel. SharkBite Water Heater Connectors will decrease the amount of time and effort needed to install a Water Heater in your home and are the fastest way to complete your project.
           

          Are these connections "full flow"?

          Asked by
          singlebuyer
          Winston-Salem, NC
          July 17, 2016
           
          The NuMax SFN64 Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer is ideal for applications such as decorative trim, furniture trim, rail moulding, crown moulding, window casing, door installation, base boards, chair rails, picture frame assembly, and hobbies and crafts. Compatible with 16 gauge straight finish nails from 1 in. to 2-1/2 in., this air powered nail gun features a quick jam release for fast clearing in the event of a jammed fastener, along with a tool-free finger depth adjust for various applications. An ergonomically engineered die cast aluminum body makes this rugged and lightweight finish nailer easy to operate over extended periods of time. The comfort grip handle and no mar safety tip ensure great results by increasing precision and preventing damage to your work surfaces. A one piece drive blade of hardened steel adds to the durability of this nail gun. Air tool oil and adjustment tools are included. The Pneumatic 16-Gauge 2-1/2 in. Straight Finish Nailer will increase the productivity of DIYers at home as well as professional contractors at the job site, and is covered by NuMax's 1 Year Limited Warranty and 30 Day Limited Parts Warranty.
           

          Reason the nailer intermittently does not fire?

          Asked by
          singlebuyer
          winston-salem, nc
          December 13, 2015
          I just got the gun. I find that it will not fire about half the time. I get a poof of air around the trigger sometimes when I pull the trigger but no nail is fired. Other times no poof but nothing when the trigger is pulled no nail is fired. Aggravating at the every least. I am holding the gun the same as when it fires. Everything else is very satisfactory. Plenty of nails, pressure.
           
          singlebuyer's Answers
           
          Bring your guests holiday cheer with this decorative inflatable. This colorful archway is an adorable way to greet all passerby. Lights up for nighttime enjoyment and self-inflates in seconds for easy set up. Tethers and yard stakes are included to keep it secure to the ground.
           

          when will you get more in

          Asked by
          mikeypooh
          January 13, 2016
          Asked by
          singlebuyer
          Winston-Salem, NC
          September 11, 2019
          Answer: 
          you will need to call home depot and ask.1 (800) 466-3337
           
          Bring your guests holiday cheer with this decorative inflatable. This colorful archway is an adorable way to greet all passerby. Lights up for nighttime enjoyment and self-inflates in seconds for easy set up. Tethers and yard stakes are included to keep it secure to the ground.
           

          Is this archway lighted?

          Asked by
          pepperlady
          Pubelo
          November 4, 2015
          Asked by
          singlebuyer
          Winston-Salem, NC
          September 11, 2019
          Answer: 
          yes, it has several lights around the perimeter that point inside. I mistook them for air escape valves. when I put it up for review the sun was out and i could not see the lights. but there are several and do a good job. its really neat
           
          Bring your guests holiday cheer with this decorative inflatable. This colorful archway is an adorable way to greet all passerby. Lights up for nighttime enjoyment and self-inflates in seconds for easy set up. Tethers and yard stakes are included to keep it secure to the ground.
           

          Why do I have to manually lift the archway at the start even with fan blowing. It doesn't lift itself up on its own?

          Asked by
          1sttimeInflatable
          December 12, 2015
          Asked by
          singlebuyer
          Winston-Salem, NC
          September 11, 2019
          Answer: 
          you have to stand it up and get your legs straight so the weights inside the leg bottoms are situated so it stands up straight. I never expected that to do it on its own. i expect it to stand after I get it set.
           
          Bring your guests holiday cheer with this decorative inflatable. This colorful archway is an adorable way to greet all passerby. Lights up for nighttime enjoyment and self-inflates in seconds for easy set up. Tethers and yard stakes are included to keep it secure to the ground.
           

          What’s is the actual distance of the space between the sides of the archway inflated. Not the distance from the outside

          Asked by
          Steve
          November 3, 2018
          Asked by
          singlebuyer
          Winston-Salem, NC
          September 11, 2019
          Answer: 
          about 40". You actually control that by how far you place the legs apart. I gave you the inside as mine sits
           
          The Frigidaire 30 Front Control Range provides maximum space for your cooking needs with 5.0 cu. ft. of cooking space and a powerful 3,000-Watt Quick Boil Element that expands to accommodate various sizes of cookware. With the Frigidaire Fit Promise, we promise that the 30 in. wall oven will fit your existing cutout of the same width and configuration.
           

          The specs indicate that the range is 47 inches in height. This cannot be correct. I am planning...

          Asked by
          RGC
          June 5, 2019
          The specs indicate that the range is 47 inches in height. This cannot be correct. I am planning to put the range in an Ada compliant kitchen. What is the correct height of the range.
          Asked by
          singlebuyer
          Winston-Salem, NC
          September 1, 2019
          Answer: 
          its about 36" same as a counter.
           
          1 2 3 4 5 ... 39 >>