This 3-light track fixture captures farmhouse chic design that is on-trend. Without compromising on aesthetic nor function, this stylish farmhouse inspired piece features vintage adjustable shades that hang on a sleek faux driftwood gray wooden base to help direct lighting where you most desire. No matter if that’s in your living room, bar, family room or kitchen, the fixture will solve your lighting needs. Updating the lighting in your home is the most effective way to accomplish a striking, yet simple, DIY remodel.
We got this light fixture specifically for the driftwood finish to match the gray oak flooring in our kitchen, and it was a perfect match. As you can see, we added a box made from the same laminate as the floor, to drop the fixture down some due to our high ceilings and it worked and matched great. Installation was a little tricky because the screws the attach to light to the base are barely long enough to start the nuts, but otherwise we had no issues.
The Complete Cable Concealer Management Kit in Black from Stalwart is the perfect cord organizer. It contains everything you need to organize those messy cables. Each kit contains 6 cable cover raceways 1-1/8 in. x 11/16 in. x 25 in. each. That is 150 in. of cable concealment.
This item worked great for us to conceal the tangle of wires behind our DVD, surround sound system, satellite receiver and TV. It comes with about twelve feet of channel, adhesive strips for each section of channel, and enough T’s and elbows for a variety of different designs. The adhesive appears to adhere to the wall well so far. The covers open easily if there is every a need to add additional wires or cables. I only gave this an “average” rating due to the T’s and elbows. While the channels and the adhesive strips are good, the other fittings are somewhat flimsy and don’t attach well to the channels.
Single willow fence panels cover approximately 96 sq. ft. of flat area. Individuals willow pole diameters vary between 1/4 in. x 1/2 in. while tapering moderately over their height of 6 ft. Excellent for tradeshow backdrops, convention events, kids rooms, themed parties, basements and most any tropical themed oriented design. Even though this item is not completely see through, the item can be used to hide your unsightly pool equipment, air condition or heating units and trash receptacles. Easily rolled and unrolled for storing or transporting.
This fence is an economical and quick way to add privacy to your outdoor or indoor space. We used it to add privacy to our firepit/ BBQ/patio/ hot tub area and block the view of a busy side street. I attached it to an existing woven wire fence using UV resistant cable ties and installation was simple other than this being pretty heavy. Two people are a necessity to handle and install this, as it is somewhat heavy and pretty floppy until attached to something.
The Everbilt gas dryer connector kit is designed to connect all major brands of dryers to a shut off valve. The connector is certified for indoor and outdoor use on appliances up to 60,500 BTUs. This gas dryer connector kit includes an excess flow valve that allows for a quick shut-off action blocking the gas flow in the event of a leak or disconnect, preventing the onset of a hazardous situation. The epoxy coated gas connector is built to withstand exposure to harsh environments and resist corrosion caused by many home care products. The kit includes (1) 4-foot 1/2-inch OD coated gas dryer connector, (1) ½-inch MIP auto shut-off valve, (1) ½-inch MIP tapped 3/8-inch FIP fitting, (1) ½-inch FIP fitting, (1) 3/8-inch MIP fitting, (1) leak detection solution, (1) pipe thread sealant.
This is a convenient way to get all the pieces needed to plumb you gas dryer to your gas source. Everything needed, including pipe sealant and leak testing fluid is included. I do recommend adding a valve approved for gas on the supply line this kit will be hooked to allow turning off the gas to your dryer without shutting down any other gas appliances. Plus the added benefit of this kit is the automatic shut off in the event of the line getting broken, preventing a potential catastrophic explosion!
The Everbilt gas range connector kit is designed to connect all major brands of ranges to a shut off valve. The connector is certified for indoor and outdoor use on appliances up to 106,000 BTUs. This gas range connector kit includes an excess flow valve that allows for a quick shut-off action blocking the gas flow in the event of a leak or disconnect, preventing the onset of a hazardous situation. The epoxy coated gas connector is built to withstand exposure to harsh environments and resist corrosion caused by many home care products. The kit includes (1) 4-foot 5/8-in. OD coated gas range connector, (1) 3/4-in. MIP tapped ½-in. FIP auto shut-off valve, (1) 3/4-in. MIP tapped 1/2-in. FIP fitting, (1) ½-inch MIP tapped 3/8-inch FIP fitting, (1) leak detection solution, (1) pipe thread sealant.
This is a convenient way to get all the pieces needed to plumb you gas range to your gas source. Everything needed, including pipe sealant and leak testing fluid is included. I do recommend adding a valve approved for gas on the supply line this kit will be hooked to allow turning off the gas to your range without shutting down any other gas appliances. Plus the added benefit of this kit is the automatic shut off in the event of the line getting broken, preventing a potential catastrophic explosion!
Commercial Electric White LED Retrofit Kit to Upgrade 8 ft. Strip Lights to LED 4000K Bright White to 5000K Daylight LED Tubes with Sockets
LED Retrofit Kit consists of four 4 ft. LED Daylight Tubes. 8 non shunted sockets and 1 metal kit. This innovative kit comes complete for the end user to retrofit older 4 ft. fluorescent fixtures such as Troffers, Strip Lights, Wraps and Puffs.
Are extra bracket kits available? I want to use the kit to retrofit 8' single lamp fixtures.
Bring a psychedelic black light effect to your Halloween party with the LED Projection Fire and Ice. Just plug it in and begin using it, this outdoor UV light is extremely durable and reflect bright when using a UV interactive product.
Exquisite hardwood grains run along the length of this PureBond Maple Plywood Project Panel, featuring rotary-cut veneers from domestically grown, sustainably harvested trees that exhibit the warmth and timeless quality of natural timber. The 7-ply panel is comprised of 100% wood (no MDF or particleboard), boasting a yellow poplar core substrate layered in cross-band formation to fortify its flatness and strength. The soy-based PureBond technology is formaldehyde-free, producing a water-resistant, nontoxic decorative plywood panel that is not prone to warp like solid wood and will not emit harmful fumes like UF-constructed sheets. A cost-competitive alternative to composite panels that may degrade interior air quality over time, this hardwood plywood from Columbia Forest Products is a superb choice for DIYers and professional tradesmen looking for stellar results on their next woodworking project.
The Superior Tennessee Stack Stone Panel is made from high density polyurethane. These panels perfectly recreate the look of natural stone. Each panel covers approximately 7.50 sq. ft. These faux stone panels fit together nearly seamlessly with their superior interlocking system. What once took highly trained mason hours to install, now can be done quickly and easily by the beginner do-it-yourselfer in very little time. Superior stack stone panels are durable, lightweight, cost efficient, authentic and cleaned easily with just soap and water. Design ideas - superior stack stone panels are perfect for an interior accent wall, backsplash, outdoor kitchen or a complete exterior building facelift. Installing traditional stone would be a long drawn out process; however, those days are over with Superior Faux stone panels. These panels can change the look and feel of any project in no time at all. Installation can easily be accomplished by the beginner do-it-yourselfer or the seasoned professional. The product is installed with screws, glue and can be cut easily with a hand saw or electric saw. Panels can be mitered to create inside or outside corners. Also available are pre-molded corners that can be purchased separately. Available accessories (purchased separately): inside corner, outside corner, trim sill, top sill and touch up kit.
The PIC LED Bug Zapper is a dual-purpose bug zapper compatible with most standard sockets. The zapper utilizes LED and blue UV light to draw in flying insects within an 855 sq. ft. area. The 2000-volt electric grid kills the flying insects quickly and efficiently, and the bright 920 lumen LED light is suitable for illuminating surrounding areas.