BrassCraft Speedi Plumb Plus 3/8 in. Compression inlet x 1/2 in. Female Iron Pipe outlet x 16 in. of length flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your faucet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Use to hookup cold or hot water supply. Color: Silver/ Braided Polymer.
Product worked great! I was actually going to return the pair due to the new faucet hookup requiring about a 12" long faucet connector rather than a 16" long one as needed with my original recessed faucet. However, this ended up working to my advantage since the hot and cold hookups are reversed in my downstairs half bath. The additional length allowed me to right this wrong, something that had been bugging me for quite some time.
Use the #11 3.5 oz. Acrylic Wood Filler on commercial or residential flooring projects. This acrylic filler helps to fill in laminate-, engineered- or solid hardwood floors. Squeeze filler into area and smooth with fingers or damp cloth. Fill areas greater than 1/4 in. in layers, allowing 4 hours drying time between applications. Clean-Up: Wipe off excess filler immediately using a clean white cloth dampened with warm water before material hardens. Do not rub so hard that the finish becomes polished. Keep from freezing. Hardened material may be removed with odorless mineral spirits after allowing the materials to soften for 5 minutes. Designed to coordinate with Candleglow, Rhapsody Honey, Shadwell Honey, Shadwell Sienna, Tamarisk Honey, Terra Cotta, Umber Brown, Plymouth Brown, Gunstock, Santa Fe, Antique, Cinnamon, Ponderosa, Clove and Tropical Mahogony Natural colored hardwood flooring. Color: Candleglow/ Rhapsody Honey/ Terry Cotta/ Umber Brown.
The RIDGID Miter Saw Stand and Utility Vehicle are compatible with most sliding and compound miter saws. It is constructed from heavy duty steel for plenty of strength and support on the job. It's also light enough for portability, with large wheels to go up and down stairs or over rough construction sites. The miter saw stand features an upright folding design for easy storage and set-up.
The saw stand was fairly easy to assemble, no thanks to the instructions/illustrations. This is an extremely sturdy stand, and is able to support my old Delta miter saw, which is very heavy, with no problems. However, I did have to fabricate a wooden platform with correctly-spaced holes to allow four bolts to provide the necessary support for the saw since the saw mounting holes were offset by a large amount. I love the fact that it allows about 55" on either side of the blade for material to be cut.